Controls

Description

Compact is the control unit for hight adjustable workstations and is matched to all Ketterer drives.
With one control unit can be controlled:

  • up to three drives in parallel structure (one or two drives follow the master drive)
  • two drives synchronously (drives are individually controlled)

Special features

  • Control box Compacteco, Firmware-Version 1.9
  • Voltage supply variants: 230 V and 110 V
  • Freely stroke with hand switch with display (HSU-MDF-4M2-LD or TOUCHfx) programmable
  • Ketterer can preprogram a desired stroke
  • Duty cycle 2 min. ON/ 18 min. OFF
  • Power cable has to be ordered separately

Technical notes

  • For stroke programming or changing on site a hand switch with display is always required (see hand control and motor cables).
  • Please note the permissible duty cycle of the controller. If the operating times are exceeded the controller switches off automatically.
  • Attention: Electric drives usually have a shorterduty cycle than controllers and are thus system-leading.


Control box

Description

Drives for use with

1000.49-36 / Compact-e-3-KTS-4778-EU

one to three motors parallel

(4778, 4779)**

1000.49-46 / Compact-e-3-KTS-4778-US

one to three motors parallel

1000.49-37 / Compact-e-3-KTS-4779-EU

one to three motors parallel

1000.49-47 / Compact-e-3-KTS-4779-US

one to three motors parallel

1000.49-01 / Compact-e-3-KTS-4630-EU

one to three motors parallel

(3143.00-V01/ V02)*
(4114, 4630, 4773) *
4643 **

1000.49-02 / Compact-e-3-2-KTT-4630-EU

two motors synchronous

1000.49-11 / Compact-e-3-KTS-4630-US

one to three motors parallel

1000.49-12 / Compact-e-3-2-KTT-4630-US

two motors synchronous

1000.49-28 / Compact-e-3-KTS-3143.00-V03-EU one to three motors parallel 3143.00-V03**
1000.49-29 / Compact-e-3-2-KTT-3143.00-V03-EU two motors synchronous
1000.49-38 / Compact-e-3-KTS-3143.00-V03-US one to three motors parallel
1000.49-39 / Compact-e-3-2-KTT-3143.00-V03-US two motors synchronous

1000.49-03 / Compact-e-3-KTS-3130-EU

one to three motors parallel

(3120, 3121, 3130)**

1000.49-04 / Compact-e-3-2-KTT-3130-EU

two motors synchronous

1000.49-13 / Compact-e-3-KTS-3130-US

one to three motors parallel

1000.49-14 / Compact-e-3-2-KTT-3130-US

two motors synchronous

1000.49-05 / Compact-e-3-KTS-3122-EU

one to three motors parallel

3122 **

1000.49-06 / Compact-e-3-2-KTT-3122-EU

two motors synchronous

1000.49-15 / Compact-e-3-KTS-3122-US

one to three motors parallel

1000.49-16 / Compact-e-3-2-KTT-3122-US

two motors synchronous

1000.49-09 / Compact-e-3-KTS-3133.00-EU

one to three motors parallel

3133.00

1000.49-10 / Compact-e-3-2-KTT-3133.00-EU

two motors synchronous

1000.49-19 / Compact-e-3-KTS-3133.00-US

one to three motors parallel

1000.49-20 / Compact-e-3-2-KTT-3133.00-US

two motors synchronous

1000.49-07/ Compact-e-3-KTS-3133.48-EU

one to three motors parallel

3133.48 **

1000.49-08 / Compact-e-3-2-KTT-3133.48-EU

two motors synchronous

1000.49-17 / Compact-e-3-KTS-3133.48-US

one to three motors parallel

1000.49-18 / Compact-e-3-2-KTT-3133.48-US

two motors synchronous

* Motor cable 4138.53-01/ Length 1 m or 4138.53-02/ Length 2 m
** Motor cable 3122.53-02/ Length 1.75 m

Power cable Connector
3143.53-22 / Power cable LOG-CBL-PWK plug for control with 3-pin Schuko - Europe
3143.53-23 / Power cable LOG-CBL-PWK-UK for control with 3-pin plug - UK
3143.53-24 / Power cable LOG-CBL-PWK-DK for control with 3-pin plug - Denmark
3143.53-25 / Power cable LOG-CBL-PWK-SW for control with 3-pin plug - Switzerland
3143.53-28 / Power cable LOG-CBL-PWK-USA for control with 3-pin plug - USA